0755-26712201

Chinese

English

泰科机器人

AP Series Intelligent Programmable DC Servo Driver

Techservo Intelligent's new AP (Accurate, Performance) series DC/AC servo drivers are all digital servo drivers based on DSP, high performance, high precision, multi-function and network. It integrates programmable motion control, PLC and servo drive functions. Mainly used in linear (DDL), torque (DDR), voice coil, brushless, brushless servo motor position, speed, torque control. It can operate in three modes: Stand-alone, external control, or distributed network control. It can support multiple motor feedback. Among them, APX series AC servo drives can meet the requirements of high power. All of them are imported from foreign advanced technology, and their performance is very stable.

PC-based programming configuration software MCK provides a powerful, flexible, fast and easy-to-use software platform for the application of AP series drivers: parameter configuration of motor and sensor, automatic phase setting, automatic or manual adjustment of PID, trial operation, real-time analysis and evaluation of oscilloscope, error alarm record, parameter status monitoring, motion sequence programming, etc.

MLC/MLO motion function library can provide fast application for APM series drivers in C/C++/VC/VB/LabView development environment.

  • Parameters
  • Download


AP Series Intelligent Servo Driver


Servo Driver Model APX Series Servo Driver APXS Series Servo Driver APD Series Servo Driver APS Series Servo Driver ADM Series Servo Driver
Driving motor linear(DDL),moment(DDR),voice coil,brushless,brushless servo motor linear(DDL),moment(DDR),voice coil,brushless,brushless servo motor linear(DDL),moment(DDR),voice coil,brushless,brushless servo motor linear(DDL),moment(DDR),voice coil,brushless,brushless servo motor linear(DDL),moment(DDR),voice coil,brushless,brushless servo motor machine
Control mode motion sequence,point-to-point,PVT,electronic gear,cam,position,speed,torque control mode motion sequence,point-to-point,PVT,electronic gear,cam,position,speed,torque control mode
motion sequence,point-to-point,PVT,electronic gear,cam,position,speed,torque control mode electronic gear,position,speed,torque control mode electronic gear,position,speed,torque control mode Sequence,point-to-point,PVT,Electronic Gears and Cams,Position/Speed/Torque Cycle Synchronization(CSP,CSV,CST)
Operation mode Stand-alone,external control,or distributed network control Stand-alone,external control,or distributed network control Stand-alone,external control,or distributed network control external control Stand-alone,external control,or distributed network control
Communication types RS232、CAN/CANopen、EtherCAT RS232、CAN CANopen、RS232 RS232 RS232、EtherCAT、CANOPEN
Input and Output 1 +10V Analog Input
12 digital input, no optical barrier.
One Enabler Specific and 11 Programmable Universal
Four digital programmable outputs, no optical barrier
1 +10V Analog Input
12 digital input, no optical barrier.
One Enabler Specific and 11 Programmable Universal
Four digital programmable outputs, no optical barrier
1 +10V Analog Input
12 digital input, no optical barrier.
One Enabler Specific and 11 Programmable Universal
Three digital programmable outputs, no optical barrier
1 +10V Analog Input
Six digital inputs, one enabling dedicated, five programmable universal
2 digital programmable output, no optical barrier
1 +10V Analog Input
11 digital input and 6 digital output, no optical barrier.
feedback Orthogonal Incremental Encoder, Maximum Rate 5M Line/s (20M after 4-fold Frequency)
Digital Hall (U, V, W, 120 degree electrical phase difference)
Back-EMF
Analog Sin/Cos Encoder Optional
Reslover is optional

Encoder 2 Input or Output (Full Closed Loop Control)
Orthogonal Incremental Encoder, Maximum Rate 5M Line/s (20M after 4-fold Frequency)
Digital Hall (U, V, W, 120 degree electrical phase difference)
Analog Sin/Cos Encoder Optional
Reslover is optional
Encoder 2 Input or Output (Full Closed Loop Control)
Orthogonal incremental encoder, maximum speed 5Mline/s (20M after 4-fold frequency)
Digital Hall (U, V, W, 120 degree electrical phase difference)
Analog Sin/Cos Encoder Optional
Reslover is optional
Encoder 2 Input or Output (Full Closed Loop Control)
Orthogonal Incremental Encoder, Maximum Rate 5M Line/s (20M after 4-fold Frequency)
Digital Hall (U, V, W, 120 degree electrical phase difference)
Back-EMF
Orthogonal Incremental Encoder, Maximum Rate 5M Line/s (20M after 4-fold Frequency)
Digital Hall (U, V, W, 120 degree electrical phase difference)
Analog Sin/Cos Encoder Optional
Second Incremental Encoder
Panasonic Incremental Encoder (A Format)
SSI, EnDat, Absolute A
Domochuan and Panasonic Absolute Encoder A
Nikon and Sanyo Absolute Encoder A
Power supply voltage 18-30VDC 18-30VDC 20-90 VDC,maximum continuous current 12A,peak current 36A 18-160VDC + 14~80V (DC),maximum continuous current 15A,maximum peak current 30A (DC)
Comprehensive protection design Overcurrent,Short Circuit,Grounding,Overvoltage,Undervoltage,I2t,Control Error Overcurrent,Short Circuit,Grounding,Overvoltage,Undervoltage,Overtemperature,I2t,Control Error Overcurrent,Short Circuit,Grounding,Overvoltage,Undervoltage,Overtemperature,I2t,Control Error Overcurrent,Short Circuit,Grounding,Overvoltage,Undervoltage,I2t,Control Error Overcurrent,Short Circuit,Grounding,Overvoltage,Undervoltage,I2t,Control Error




Model Selection


APX Series Servo Drivers
Servo Driver Model Supply Voltage
VAC(V)
Continuous Current
Ic(A)
Peak Current
Ip(A)
Outline Size
(mm)
Encoder Type
APX-06A230-CALTE 80…230 6 18 195 x 150 x 65mm Incremental Encoder
APX-12A230-CALTE 80…230 12 36 195 x 150 x 65mm Incremental Encoder
APX-20A230-CALTE 80…230 20 40 195 x 150 x 65mm Incremental Encoder
APX-20A230-CALTSC 80…230 20 40 195 x 150 x 65mm Sin/Cos Encoder
APX-20A230-CALTR 80…230 20 40 195 x 150 x 65mm Resolver
APXS Series Servo Driversv
Servo Driver Model Supply Voltage
VAC(V)
Continuous Current
Ic(A)
Peak Current
Ip(A)
Outline Size
(mm)
Encoder Type
APXS-05A230-CALTE 80…230 5 10 154 x 102 x 53mm Incremental Encoder
APXS-05A230-CALTSC 80…230 5 10 154 x 102 x 53mm Sin/Cos Encoder
APXS-05A230-CALTR 80…230 5 10 154 x 102 x 53mm Resolver
APD Series Servo Drivers
Servo Driver Model Supply Voltage
VAC(V)
Continuous Current
Ic(A)
Peak Current
Ip(A)
Outline Size
(mm)
Encoder Type
APD-12D80-CALTE 20~90V 12 36 167 x 100 x 31mm Incremental Encoder
APD-12D80-CALTSC 20~90V 12 36 167 x 100 x 31mm Sin/Cos Encoder
APD-12D80-CALTR 20~90V 12 36 167 x 100 x 31mm Resolver
APS Series Servo Drivers
Servo Driver Model Supply Voltage
VDC(V)
Continuous Current
Ic(A)
Peak Current
Ip(A)
Outline Size
(mm)
Encoder Type
APS-06D48-RALTE 18…48 6 18 168 x 100 x 31mm Incremental Encoder
APS-12D80-RALTE 18…80 12 36 168 x 100 x 31mm Incremental Encoder
APS-03D160-RALTE 18…160 3 9 168 x 100 x 31mm Incremental Encoder
ADM Series Servo Drivers
Servo Driver Model Supply Voltage
VDC(V)
Continuous Current
Ic(A)
Peak Current
Ip(A)
Communication Type Outline Size
(mm)
Encoder Type
ADM-15D80-CALT 14-80 15 30 CANopen 76*58*20mm Incremental Encoder
Absolute Encoder
Sin/Cos Encoder
ADM-15D80-EALT 14-80 15 30 EtherCAT 76*58*20mm Incremental Encoder
Absolute Encoder
Sin/Cos Encoder




Contact US

  • Telephone:0755-26712201 0755-26712221
  • Fax:+86-755-26712958
  • Email:sales@techservo.com
  • Address:5th Floor,12 Blocks,Nangang NO.2 Industrial Zone,
    1026 Songbai Road,Nanshan District, Shenzhen
  • Sweep and search
    Pay attention to Techservo
    techservo
    You have one more servo selection channel

Message

If you are interested in Techservo Products,please leave your contact information so that we can contact you.

Copyright © 2019 Techservo(Shenzhen) Co., Ltd..All Rights Reserved. 粤ICP备09089119号-5